background image

3

UK

Important note
Non-compliance may result in malfunction or interference.

4.1   Warnings used

WARNING

Warning of serious personal injury. 
Death or serious irreversible injuries may result.

4.2   Safety symbols on the device

General warning on the device.
When this symbol appears, consider the corresponding section in the operating 
instructions.

5  Installation

 

► Disconnect power before installation.

 

► Mount the unit in a control cabinet with a protection rating of at least IP 54 to 

ensure protection against accidental contact with dangerous contact voltages 
and against external influence. The control cabinet has to be installed in 
accordance with local and national regulations.  

 

► Mount the unit vertically on a DIN rail. 

 

► Leave enough space between the unit and the top or bottom of the control 

cabinet as well as to adjacent devices to enable air circulation and to avoid 
inadmissible heating. 

5.1  Installation instructions

Electrostatic discharge 
The device contains components that can be damaged or destroyed by 
electrostatic discharge. 

 

► When handling the device, observe the necessary safety precautions against 

electrostatic discharge (ESD).

 

► Only operate the device when mounted on a grounded DIN rail.

Summary of Contents for AL19 Series











Reviews: