![background image](http://html.mh-extra.com/html/ifm/al1100/al1100_operating-instructions-manual_620802049.webp)
49
ifm
Operating Instructions IO-Link Master with Profinet interface StandardLine 4 Ports IP 65 / IP 67 (AL1100)
2017-08-18
Configuration
>
8.4.5
Configure the Profinet interface
22761
In order to configure the Ethernet interface of the AL1100:
Prerequisites
>
AL1100 is correctly integrated in the Profinet project (→
Add the device to the Profinet network
1 Open object characteristics
►
Start the application "HW Konfig"
►
Click on AL1100.
►
Select [Target System] > [Ethernet ...] > [Edit Ethernet Users].
>
[Edit Ethernet Users] window appears.
2 Search AL1100
►
Click on [Durchsuchen ...] button.
>
[Browse Network] window appears.
►
Click on [Start] button.
>
STEP 7 browses the Profinet network for devices.
>
List shows found devices.
►
Select AL1100 in list and click [OK] to adopt the device.
>
The [MAC address] shows the MAC address of the AL1100
3 Set IP address and network mask
►
Click on the [Use IP parameters] selection field in group [Set IP configuration].
►
Enter the required IP address in the [IP address] field.
►
Enter the required subnet mask in the [Subnet mask] field.
4 Assign device names
►
Enter the required Profinet name in the [Device name] field.
►
Click on the [Assign Name] button.
>
STEP 7 assigns the selected name to the AL1100.
►
Click on the [Close] button to close the window.
>
8.5
Profinet: Configure IO-Link devices
18428
The AL1100 supports the configuration of the connected IO-Link devices out of the Profinet projection
software. The configurable parameters depend on the corresponding IO-Link device.
Information about the usable functions:
→
Profinet: Programmers' notes
(
Available parameters of the IO-Link devices:
→ Operating instructions of the IO-Link device
Summary of Contents for AL1100
Page 78: ......