![background image](http://html1.mh-extra.com/html/ifm/ac1401/ac1401_programming-manual_3896314035.webp)
35
ifm
Programming Manual AS-i Gateway AC14 (4.2.x)
12/2017
Programming
Use functions of the ifm package
>
7.4.2
Configure system
17450
To configure the system of the device, use the following function blocks:
Name
Description
Reference
QuickSetupASi_Master
Execute quick setup routine on an AS-i master
→
QuickSetupASi_Master
(
→ p.
Set_TimeDate
Set system time (date, time) of the system
→
Set_TimeDate
(
Get_FieldbusInfo
Read fieldbus type, the status of the field bus connection
and the parameters of the fieldbus interface
→
Get_FieldbusInfo
(
→ p.
>
7.4.3
Configure AS-i master
17448
To configure the AS-i masters of the device, use the following function blocks:
Name
Description
Reference
Set_Mode
Set operating mode of the AS-i master (projecting mode
or protected operation)
→
Set_Mode
(
→ p.
Set_ASi_Config
Set diagnostic functions of the AS-i master (double
address recognition, earth fault detection)
→
Set_ASi_Config
(
→ p.
Set_AdressMode
Set automatic addressing of the AS-i master
→
Set_AddressMode
(
→ p.
>
7.4.4
Configure AS-i slaves
17449
To configure the AS-i slaves, that are connected to the device, use the following function blocks:
Name
Description
Reference
Set_SlaveAddress
Change address of an AS-i slave
→
Set_SlaveAddress
(
→ p.
Set_SlaveParameter
Change I/O configuration and ID codes (IO, ID, ID1, ID2)
of an AS-i slave
→
Set_SlaveParameter
(
→ p.
Set_SlaveExtendedID1
Extended ID1 of an AS-i slave
→
Set_SlaveExtendedID1
(