6. Programming
Take the following 3 steps for programming:
If no button is pressed for 20s during the setting procedure, the unit
returns to the operating mode.
Locking / Unlocking
The unit can be electronically locked to prevent unwanted adjustment
of the set parameters: Press both setting buttons for 10s. Indication
goes out briefly (acknowledgement of locking / unlocking). Units are
delivered from the factory in the unlocked state.
19
ENGLISH
1
Select the parameter to be changed
Press the "Mode/Enter"
button several times until the
respective parameter is
displayed.
Indication of the parameter
(here SP1).
2
Set the parameter value
Press the "Set" button for at
least 5s.
As soon as the display of the
parameter value is changed
the value can be increased*
(incremental by pressing briefly
or scrolling by holding pressed).
After 5s the unit passes to the
programming mode, the value
increases continuously.
3
Acknowledgement of the parameter value
Press the "Mode/Enter"
button briefly.
The set parameter value becomes
effective.
Wait 5s (then the unit passes to
the operating mode), or start
again with step 1 to program
other parameters.
*Decrease the value: Let the display of the parameter value move to the
maximum setting value. Then the cycle starts again at the minimum setting
value.