manualshive.com logo in svg

IFM Electronic O3M151, Programming Manual, Page: 13 / 62

Share
Download
IFM Electronic O3M151 Programming Manual Download Page 13

13

O3M151 3D Smart Sensor Object Detection

UK

5.1.4  Relevant output

The CAN messages with the result values of the detected objects (e�g� position or relevant speed) can be 

received and interpreted on the controller used�
The objects are filtered via the object position for area monitoring� Objects which are located within a criti-

cal area result in a reaction, e�g� a warning signal or stopping of the vehicle�
The vehicle's own data are expected on the CAN bus� If parameter egodatamode=2, the data are not 

expected (→ 

"7 Interface")�

5.1.5  Operating property/performance

 

●

The detection performance is dependent on the distance, size and reflectivity of an object�

 

●

For attachment from above:  

The minimum detectable object height is dependent on the system parametrisation� Under the poorest 

conditions, this is 50 cm�

 

●

For frontal attachment:  

The minimum range for the detection of persons in the monitoring area is 1 m to 15 m with normal 

ambient conditions�

Summary of Contents for O3M151































































Reviews:

No comments