manualshive.com logo in svg

IFM Electronic O3M151, Programming Manual, Page: 12 / 62

Share
Download
IFM Electronic O3M151 Programming Manual Download Page 12

O3M151 3D Smart Sensor Object Detection

12

Attachment on vehicle

Automatic object tracking is also suitable for somewhat difficult and/or rough terrain� It recognises the next 

20 objects (adjustable) next to the vehicle and passes on information such as the distance, size and posi-

tion of each object to the machine controller�

The 

Object Detection

 function enables area monitoring by attaching the Smart Sensor to a vehicle�

 

►

Mount the Smart Sensor tilted downward on the vehicle�

 

►

Set the mounting position values in the ifm Vision Assistant operating software�

5.1.3  Parametrisation

There is a separate template/wizard for area monitoring (

→ 

ifm Vision Assistant Programming 

Manual)

Object detection range (height)

A minimal and a maximal object detection height can be defined� 

 

●

The minimal height provides for a clear separation between the floor and the objects�

 

●

The maximal height limits the object recognition in the height (height-adjustable objects)�

 

> The minimal height (Zmin) should be set to 0,5 m and the maximal height (Zmax) should correspond 

to the vehicle height plus a tolerance (~20 cm)�

Frame rate

 

►

Set the frame rate to 33 Hz�

Object detection type

 

►

Set the Object Detection parameter to "Standard Mode"� (Parameter ObjectListCust_objectDetection-

Variant=0)  

If a distinction is to be made between normal objects and objects with retro reflectors, the parameter 

ObjectListCust_objectDetectionVariant=1 can be set�

 

►

Set noise suppression filter to "Level 2"�

If the load on the CAN bus is too great, it can be reduced with the setting CAN output cycle Modulo 

(→ Operating instructions).

Summary of Contents for O3M151































































Reviews:

No comments