manualshive.com logo in svg

IFM Electronic O3M151, Programming Manual, Page: 10 / 62

Share
Download
IFM Electronic O3M151 Programming Manual Download Page 10

O3M151 3D Smart Sensor Object Detection

10

5  Application examples

5.1  Area monitoring

5.1.1  Introduction

With static attachment and with attachment on a vehicle, the 

Object Detection

 function enables area 

monitoring of several user-defined areas simultaneously�

Functions:

 

●

Monitoring of an area in front of a door or access point

 

●

Control and/or signalling of opening via the controller based on the CAN sensor signals� 

 

●

Attachment to a vehicle and monitoring of areas in the driving path

 

●

Selective distinction between normal and reflective objects

 

●

Evaluation of the presence of the object in the sensor's field of vision

 

●

Filtering of the objects by size and speed

 

●

Monitoring of access to tunnel boring machines or to other accessible machines

When using an ifm controller or display, the included CODESYS module can be used to receive and inter-

pret the CAN signals� CODESYS program examples of various applications are available in the Download 

area (

→ www.ifm.com → my ifm → Download).

5.1.2  Attachment options

Static attachment

The Smart Sensor can be attached opposite or above the area to be monitored�

Summary of Contents for O3M151































































Reviews:

No comments