21
UK
► Press [Set] and keep it
pressed�
The flashing digit is increased, 9 is followed by 0 and the first
new digit (left) becomes active�
8 �1 8 3
[Set] permanently pressed 8 �1 9 3
[Set] kept pressed 8 �1 0 3
If digit 1 is increased this way, the display changes to the
next higher setting range (9 is followed by 10)�
8 �1 2 3
[Set] permanently pressed 9 �1 2 3
[Set] kept pressed 1 0 �1 2
► Press no pushbutton
for 3 s�
The digit following on the right flashes (= becomes active)�
If the fourth digit flashes unchanged for 3 s, digit 1 becomes
active again (if the value of digit 1 is > 0)�
8 �1 2 3
no pushbutton pressed; after 3 s 8 �1 2 3
after 3 s 8 �1 2 3
after 3 s 8 �1 2 3
after 3 s 8 �1 2 3
If digit 1 has the value “0”, the display changes to the next
lower setting range�
0 1 �2 3
no pushbutton pressed; after 3 s 0 1 �2 3
after 3 s 0 1 �2 3
after 3 s 0 1 �2 3
after 3 s (new digit 4 active and set to 0) 1 �2 3 0
after 3 s (new digit 1 active) 1 �2 3 0
Highlighted grey ( 1 ) = flashing digit
Note: If [Set] is pressed continuously, the display moves through all setting ranges;
after the end value it jumps back to the start value� Release [Set] briefly and start
the setting again�
