4
Installation
4
First of all align the safety light curtains / light grids and any mirrors without the
►
laser adjustment aid.
Insert the supplied batteries into the unit.
→
5.1 Insert batteries
►
Attach the laser adjustment aid onto the transmitter (
→
Figure 1). Ensure the
►
correct position.
Make sure that there are no people in the range of the laser beams.
►
Switch on the laser adjustment aid (
→
Figure 2).
►
Adjust the transmitter, receiver and any mirrors until the laser beam on the
►
receiver is in the same position as on the transmitter.
For exact adjustment the process has to be repeated for the top, the middle
►
and the bottom of the safety light curtain / safety light grid.
Figure 1
Figure 2
1: Exit laser light
1: On/off switch
