UK
RFID UHF Sensor
11
9.2 Laying of cables
Observe the following notes when laying the cables:
●
Lay the cables vertically and straight away from the sensor
(see figure on the right)�
●
Avoid cable loops around and on the sensor (see figure on the left)�
Figure: Incorrectly laid cable
Figure: Correctly laid cable
9.3 Drilling template
The DTE820 is fixed to the ground using 4 screws� The bore hole distances are
indicated in the following drawing� A fixture allowing installation on a mast is
available as accessory�
110
140
4,5
X
