IFM Electronic AL1300 Operating Instructions Manual Download Page 34

Page: 34 / 88

ifm

Operating Instructions IO-Link Master with PROFINET interface DataLine 4 Ports IP 65 / IP 66 / IP 67 (AL1300)

05 / 2018

Configuration

PROFINET

8.2.1

Install GSD file

22410

To represent the AL1300 in a field bus projection software (e.g. STEP 7), ifm provides a GSD file. The
user can download the GSD file from the ifm website (

→

www.ifm.com

). In the GSD file, all

parameters, process data, and their valid value ranges are defined.

To add the AL1300 to the STEP 7 hardware catalogue:
►

Download GSD file of the AL1300 from the ifm website.

►

Start STEP 7 application "HW Config".

►

Select [Options] > [Install GSD files…].

The [Install GSD files] window appears.

►

Click on [Browse …].

►

Select the GSD file of the AL1300 and click on [OK] to adopt the file.

The selected GSD file appears in the list.

►

Select the GSD file in the list and click on [Install].

STEP 7 installs the GSD file and adds the IO-Link master to the hardware catalogue.

After installation of the GSD file, the AL1300 is in the hardware catalogue in the following folder:

[PROFINET IO] > [Addiotional Field Devices] > [IO] > [ifm electronic]

AL1300

IO-Link ports

PROFINET modules

Summary of Contents for AL1300

























































































Search results

Summary of Contents for AL1300

Reviews:

Brands by name

Popular brands

IFM Electronic AL1300, Operating Instructions Manual

Search results

Summary of Contents for AL1300

Reviews:

Brands by name

Popular brands