Hardware Operations
1230B0049701
2-5
Reminder
Before you remove or install the motherboard, please follow the steps below:
Step 1: Make sure the server is not turned on or connected to the AC power. To power off
the server, see “2.1.1 Power Off”.
Step 2: Remove the chassis cover. To remove the cover, see “2.2 Chassis Cover”.
Step 3: Remove the riser card assembly. To remove the riser card assembly, see “2.14
Optional Riser Cards”.
Step 4: Disconnect all necessary cable connections.
2.3.1
To remove the motherboard
1. Loosen the two thumbscrews
.
2. Release the motherboard from the chassis by unlocking the nine locking tabs
along the
direction of the arrow and lift out the motherboard from the chassis.
Figure 2-7 Removing the Motherboard
Summary of Contents for 12H-2410
Page 3: ......
Page 103: ...Daughter Cards China RoHS Regulations Appendix...
