Hardware Operations
1230B0049701
2-44
Reminder
Before you remove or install the daughter card, daughter-card latch and I-button, please
follow the steps below:
Step 1: Make sure the server is not turned on or connected to the AC power. To power off
the server, see “2.1.1 Power Off”.
Step 2: Remove the chassis cover. To remove the cover, see “2.2 Chassis Cover”.
Step 3: Remove the riser card assembly. To remove the riser card assembly, see “2.14
Optional Riser Cards”.
Step 4: Disconnect all necessary cable connections.
The SCSI daughter card and the SAS daughter card share many similarities during the
removal and installation procedures. For your reference, the following is an example using
the SAS daughter card.
2.15.1
To remove the daughter card
Push aside the release buttons while pulling the card out of the pole.
At the same time, lift the daughter card out of the daughter card connector on the
motherboard.
Figure 2-83 Removing the Daughter Card Assembly
Summary of Contents for 12H-2410
Page 3: ......
Page 103: ...Daughter Cards China RoHS Regulations Appendix...