IEMCA KID 80-IV Touch, Instruction Manual

Page: 61 / 122

2 - INFORMATION FOR USE KID 80 SIV
EN
2 - Pag. 47 / 71
no. 34 Feeding torque
Defines the thrust value received by the bar at
each "FEEDING".
no. 35 Fixed-piece feeding
0 - (AT THE LIMIT STOP). Carries out the
feeding to the bar limit stop.
1 - (AT FIXED VALUES). Carries out the piece
feeding, in accordance to the value set in
parameter 6.
2 - (AT FIXED VALUES AND THRUST TO THE
LIMIT STOP). Carries out the piece feeding
according to the value set in parameter 6, stops
at few millimetres from the bar limit stop, and
then carries out another feeding up to the bar
limit stop, until the FEEDING signal is active.
Subparameters:
B - Position
C - Speed
D - Acceleration
E - Deceleration
34
no. 34 Feeding torque
Cmax
DEFAULT VALUE PROGRAMMABLE VALUE
Kid 80 Kid 80
40 /
35
no. 35 Fixed-piece feeding
1 - Step feeding
Pos. +1025
Speed 76200
Acc. 100
Dec. 10
DEFAULT VALUE PROGRAMMABLE VALUE
Kid 80 Kid 80
1-Step feeding 0/1/2
0 /
0 /
0 /
0 /
All manuals and user guides at all-guides.com