IEMCA BOSS 542 CNC, Manual For Use And Maintenance

Page: 166 / 167

61
3
OPERATION INFORMATION
302.035
Customer Date
Bar feeder model Y/N
Machine tool model
no.
par.
Description of parameters Phase
Default
value
Assigned
value
Page
1
Bar end adjustment machining 100 mm mm 24
2
Facing length bar change-over 0 mm mm
24
3
Facing mode bar change-over 1 24
4
Short feed safety machining 0 mm mm
25
5
Long feed safety machining 0 mm mm 25
6
Quick path machining 0 mm mm
25
7
Open collet speed machining 7 26
8
Open collet thrust lag machining 0 sec. sec.
26
9
Closed collet thrust lag machining 0 sec. sec. 26
10
Collet entry slowing down bar change-over 150 mm mm
26
11
Collet entry speed bar change-over 100 mm/sec mm/sec 27
12
Collet entry clutch bar change-over 80
27
13
Impulse number bar change-over 8 27
14
Impulse stroke bar change-over 10 mm mm
27
15
Bush opening machining 80 mm mm 28
16
Bushing closing bar change-over 150 mm mm
28
17
Spindle impulses on bar change-over 0 sec. sec. 28
18
Spindle impulses off bar change-over 0 sec. sec.
29
19
Cycle start lag bar change-over 0 sec. sec. 29
20
Remnant handling bar change-over 1
29
21
Open collet timeout machining 0 sec. sec. 31
22
Workpiece timeout machining 0 sec. sec.
31
23
Use of synchronisation machining 1 32
24
Bar pusher stop with closed collet machining 0 33
25
Pieces prior to lathe stop machining 0 33
26
Minutes prior to machine stop machining 0 min min
33
27
Closed collet thrust voltage machining 7 33
28
Max. feeding position modification bar change-over 0 mm mm
34
30
Language / / 34
LIST OF PARAMETERS
31 Bar feeder interface control / 1 37
32 K1 immediate exit / 0
37
33 Type of headstock / 1 37
34 Feeding stop mode / 1
37
65 Type of start signal from lathe / 1 37
66 Type of automatic signal from lathe / 0
37
LIST OF PARAMETERS PROTECTED BY THE ACCESS CODE