IEMCA BOSS 542 CNC, Manual For Use And Maintenance

Page: 138 / 167

33
3
OPERATION INFORMATION
302.035
0 - (no) Parameter function desactivated.
1 - (yes) Fixed headstock lathes only: during the workpiece machining, the
bar-pusher is behind the bar, locking it in this position and recover-
ing backward movements, if any.
If parameter 20 is in mode 2 - “Ejection” , bar-pusher stop during workpiece
machining occurs automatically, even if this parameter is in mode 0 - (no).
0 - Parameter function desactivated.
>0 - As soon as the number of workpieces entered has been reached, the bar
feeder stops the lathe with “OPEN COLLET”.
0 - Parameter function desactivated.
>0 - When minutes entered have elapsed, the bar feeder stops lathe with
“OPEN COLLET”.
It sets the voltage received by the feed motor during bar thrust with a closed
collet.
It will accept values from 0 to 7.
This parameter is only active when parameter 33 is in mode 2 - (SLIDING) .
24
Phase Default
0
machining : >
n o . 2 4 b a r p u s h e r s t o p
w i t h c l o s e d c o l l e t
25
Phase Default
0
machining : >
n o . 2 5 p i e c e s p r i o r t o
l a t h e s t o p
26
Phase Default
0 min
machining : > ( m i n )
n o . 2 6 m i n u t e s p r i o r
t o m a c h i n e s t o p
27
Phase Default
7
machining : > ( V )
n o . 2 7 c l o s e d c o l l e t
t h r u s t v o l t a g e