Preparing the measurement
20
Note
▪
Insert the batteries while holding the blood
pressure monitor in your hand.
▪
Take care not to activate the button on the
front!
▪
By pressing the button when inserting the
batteries, you will enter the pressure gauge
mode used for servicing purposes. Remove
the batteries and insert the batteries again.
1)
Open the battery cover on the underside of the
blood pressure monitor.
2)
Insert four batteries (AA, alkaline), with the poles
aligned correctly.
3)
Close the battery cover.
The blood pressure monitor switches on
automatically, carries out a display test and
displays the start screen. (see Fig. 5 and Fig. 6).
WARNING
Make sure that all segments are displayed by the
screen. Inform your healthcare provider if the
display is damaged.
Fig. 5: Test screen
Summary of Contents for Tel-O-Graph BT plus
Page 1: ...Operating manual EN Tel O Graph BT plus ...
Page 51: ...Rev A 18 12 2018 ...
