IEM Mobil-O-Graph PWA, Operating Manual

Page: 123 / 385

Appendix
121
EN
Troubleshooting
In the event of measurement or system errors, an error code will appear on the display of the Mobil-O-Graph
®
for
a few seconds. The following support instructions will help you understand how to deal with each error code:
Error code Measures
ERR 1 Keep your arm still during measurement. If the error occurs repeatedly, put the arm
cuff on again.
ERR 2 Keep your arm still during measurement. If the error occurs repeatedly, check the
positioning of the arm cuff and check that the cuff tube is firmly connected to the
Mobil-O-Graph
®
.
ERR 3 Keep your arm still during measurement. If this error persists, please contact your
doctor.
ERR 5 The batteries of the Mobil-O-Graph
®
are empty. Please contact your doctor.
ERR 6 Check whether the cuff tube is kinked. If the error persists, please contact your
doctor.
ERR 7 Measurement storage is full. Please contact your doctor.
ERR 8 The measurement was terminated by pressing a button. Repeat the measurement.
Press the
START button.
ERR 9 Please contact your doctor.
ERR 10 If the error persists, please contact your doctor.