IEK UNIVERSAL Series, Operating Manual

Page: 14 / 28

14
Front panel elements are shown in the Figure 1.
1 – 3
½
digits LCD, height of characters is 12.7 mm. Display shows
measurement results in digital form.
2 – Rotary range switch is used to select the functions and the limit of
measurement, as well as to enable/disable the device. The multimeter does not
operate when the switch is in the "OFF" position.
3 – Jack for hFE transistor amplification gain measurement.
4 – "10 A" input jack for connection of the positive polarity probe when
measuring current up to 10 A.
5 – «V
W
mA» input jack to connect the positive polarity probe when measuring
the voltage, resistance, current strength up to 200 mA.
6 – "COM" input jack to connect the negative polarity probe.
Figure 1 – Multimeters front panel elements
1
2
4
5
6
3