IEI Technology WAFER-PV-D5252, User Manual

Page: 120 / 142

WAFER-PV-D5252/D4252/N4552 SBC
Page 107
Figure B-14: Select a Local Source Drive
Step 6: Select a source partition (Part 1) from basic drive as shown in
77
Figure B-15 .
Then click OK.
Figure B-15: Select a Source Partition from Basic Drive
Step 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei
(
77
Figure B-16 ). Click Save . The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be iei.GHO .