IEI Technology WAFER-PV-D5252, User Manual

Page: 68 / 142

WAFER-PV-D5252/D4252/N4552 SBC
Page 55
Step 3: Insert the cable connectors . Once the cable connector is properly aligned with
the keyboard/mouse connector on the WAFER-PV-D5252/D4252/N4552,
connect the cable connector to the on-board connectors. See Figure 4-13.
Figure 4-13: Keyboard/mouse Y-cable Connection
Step 4: Attach PS/2 connectors to the chassis . The keyboard/mouse Y-cable
connector is connected to two PS/2 connectors. To secure the PS/2 connectors
to the chassis please refer to the installation instructions that came with the
chassis.
Step 5: Connect the keyboard and mouse . Once the PS/2 connectors are connected
to the chassis, a keyboard and mouse can each be connected to one of the
PS/2 connectors. The keyboard PS/2 connector and mouse PS/2 connector are
both marked. Please make sure the keyboard and mouse are connected to the
correct PS/2 connector.