IEI Technology UPC-V315-QM77 User Manual Download Page 17

Page: 17 / 145

UP C-V315-QM77 P a n e l P C

P a g e 5

Figure 1-3: LED Indicators

The descriptions of each LED indicator are listed below.

LED Indicator

Description

Power 1

Pulsing Orange: Power 1 is the main power and is in standby mode

Solid Orange: Power 1 is the second power and is in standby mode

Solid Blue: Power 1 is providing power to the system

Power 2

Pulsing Orange: Power 2 is the main power and is in standby mode

Solid Orange: Power 2 is the second power and is in standby mode

Solid Blue: Power 2 is providing power to the system

AT/ATX Power Mode

Shows the power mode status. Controlled by the AT/ATX power mode

switch.

CPU Temperature Alert

Blue: the CPU temperature is normal.

Red: the CPU temperature is too high.

Wi-Fi

The Wi-Fi module is enabled or disabled. Controlled by the BIOS (see

Section 4.4.1).

Auto Dimming

The auto dimming function is enabled or disabled. Controlled by the

BIOS (4.4.1).

Microphone

The microphone is enabled or disabled. Controlled by the BIOS

(Section 4.4.1).

Audio Mute

Light on when the audio is turned off.

Controlled by the hot keys (see Section 1.4.5).

Function

Shows the status of the function key below the LED indicator. Blinks

when the corresponding button is pushed.

LCD on/off

Summary of Contents for UPC-V315-QM77


















































































































































Search results

Summary of Contents for UPC-V315-QM77

Reviews:

IEI Technology UPC-V315-QM77, User Manual, Page: 17 / 145

Search results

Summary of Contents for UPC-V315-QM77

Reviews: