IEI Technology UPC-V315-QM77 User Manual Download Page 108

Page: 108 / 145

UP C-V315-QM77 P a n e l P C

P a g e 96

B.2.5

Cre a te Fa c to ry De fa u lt Im a g e

NOTE:

Before creating the factory default image, please configure the system

to a factory default environment, including driver and application

installations.

To create a factory default image, please follow the steps below.

S te p 1:

Turn on the system. When the following screen displays (

Figure B-10

), press

the <

> key to access the recovery tool. The message will display for 10

seconds, please press F3 before the system boots into the operating system.

Figure B-10: Press F3 to Boot into Recovery Mode

S te p 2:

The recovery tool menu appears. Type <

> and press <

Enter

>. (

Figure B-11

)

Figure B-11: Recovery Tool Menu

S te p 3:

The About Symantec Ghost window appears. Click

button to continue.

Summary of Contents for UPC-V315-QM77


















































































































































Search results

Summary of Contents for UPC-V315-QM77

Reviews:

IEI Technology UPC-V315-QM77, User Manual, Page: 108 / 145

Search results

Summary of Contents for UPC-V315-QM77

Reviews: