2
HDD Installation
1.
Remove three retention screws from the
bottom cover.
2.
Slide the HDD to connect the HDD to the
SATA connector.
3.
Secure the HDD with the bottom cover
using four retention screws.
4.
Replace the bottom cover and secure it
using three previously removed retention
screws.
Mounting the System
1.
Secure the brackets to the side panels of
the system by inserting two retention screws
into each bracket as illustrated below.
2.
Drill holes in the intended installation
surface. Insert four retention screws, two in
each bracket, to secure the system to the
surface.
