IEI Technology tKINO-AL User Manual Download Page 78

Page: 78 / 136

tKINO-AL SBC

Page 64

4.8 Chassis Installation

4.8.1 Airflow

WARNING:

Airflow is critical for keeping components within recommended

operating temperatures. The chassis should have fans and vents as

necessary to keep things cool.

The tKINO-AL must be installed in a chassis with ventilation holes on the sides allowing

airflow to travel through the heat sink surface. In a system with an individual power supply

unit, the cooling fan of a power supply can also help generate airflow through the board

surface.

4.8.2 Motherboard Installation

To install the tKINO-AL motherboard into the chassis please refer to the reference

material that came with the chassis.

4.9 SATA Drive Connection

The tKINO-AL is shipped with a SATA drive cable. To connect the SATA drive to the

connector, please follow the steps below.

Step 1:

Locate the SATA connector and the SATA power connector.

The locations of

the connectors are shown in

Chapter 3

Step 2:

Insert the cable connector

. Insert the cable connector into the on-board SATA

drive connector and the SATA power connector. See

Figure 4-21

Summary of Contents for tKINO-AL









































































































































Search results

Summary of Contents for tKINO-AL

Reviews:

Brands by name

Popular brands

IEI Technology tKINO-AL, User Manual

Search results

Summary of Contents for tKINO-AL

Reviews:

Brands by name

Popular brands