IEI Technology tKINO-AL User Manual Download Page 116

Page: 116 / 136

tKINO-AL SBC

Page 102

6.2 Available Software Drivers

All the drivers for the tKINO-AL are on the utility CD that came with the system. The utility

CD contains drivers for Windows 7, Windows 8 and Windows 10 operating systems. If the

drivers are not installed automatically, please install the following drivers manually.

The following drivers can be installed on the

tKINO-AL



Chipset



Graphics



Audio



LAN



Serial

I/O



TXE

NOTE:

The Intel

TXE requires that Microsoft's

“Kernel-Mode Driver

Framework (KMDF) version 1.11 update for Windows 7” must be

installed first on Windows 7 OS. If the KMDF is not installed, either

error 37 or error 28 may appear on the Intel TXE device in Device

Manager.

Please find the KMDF version 1.11 update for Windows 7 in the TXE

driver folder in the driver CD or click the following link to download it.

Summary of Contents for tKINO-AL









































































































































Search results

Summary of Contents for tKINO-AL

Reviews:

Brands by name

Popular brands

IEI Technology tKINO-AL, User Manual

Search results

Summary of Contents for tKINO-AL

Reviews:

Brands by name

Popular brands