IEI Technology TANK-870e-H110 Series, User Manual

Page: 36 / 110

TANK-870e-H110 Embedded System
Page 24
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.

Power on the system: press the power button for 2 seconds

Power off the system: press the power button for 5 seconds
Figure 3-15: Power Button
3.7 Power
There are two power connectors on the rear panel. Power 1 connector is a DIN connector
that can directly connect to a power adapter. Power 2 connector is a 4-pin terminal block.
The supported power input voltages are:

Power 1 (terminal block) : 9 V~ 36 V

Power 2 (DC jack) : 9 V ~ 36 V
Figure 3-16: Power Connectors