IEI Technology TANK-610-BW, User Manual

Page: 27 / 98

TANK-610-BW Em b e d d e d S ys te m
P a g e 17
Figure 3-6: Removing the Retention Screw
S te p 5: Insert into the socket at an angle . Line up the notch on the WLAN module with
the notch on the slot. Slide the WLAN module into the slot at an angle of about
20º ( Figure 3-7 ).
Figure 3-7: Inserting the WLAN Module
S te p 6:
Secure the WLAN module . Secure the WLAN module with the retention screw
previously removed ( Figure 3-8 ).
S te p 7: Connect the two RF cables to the antenna connectors on the WLAN module
( Figure 3-8 ).