IEI Technology TANK-610-BW, User Manual

Page: 26 / 98

TANK-610-BW Em b e d d e d S ys te m
P a g e 16
3.4 Wire le s s LAN Mo d u le In s ta lla tio n (Op tio n a l)
To install the optional wireless LAN (WLAN) module, please follow the steps below.
S te p 1:
Remove the bottom surface . See Section 3.2 .
S te p 2: Remove the two knockout holes for antenna installation. The two knockout
holes are located on the rear panel of the TANK-610-BW as shown in
Figure 3-4 .
Figure 3-4: Knockout Holes for Wireless Antenna
S te p 3:
Locate the PCIe Mini slot (Figure 3-5) .
Figure 3-5: PCIe Mini Slot Location
S te p 4: Remove the retention screw. Remove the retention screw for half-size card
installation as shown in Figure 3-6 .