manualshive.com logo in svg

IEI Technology SPCIE-C236, User Manual, Page: 70 / 159

Share
Download
IEI Technology SPCIE-C236 User Manual Download Page 70

 

 

SPCIE-C236 Full-size PICMG 1.3 CPU Card 

Page 55

 

Figure 4-5: Cooling Kit Support Bracket 

Step 2: 

Place the cooling kit onto the socket LGA1151 CPU

. Make sure the CPU 

cable can be properly routed when the cooling kit is installed. 

Step 3: 

Mount the cooling kit

. Gently place the cooling kit on top of the CPU. Make 

sure the four threaded screws on the corners of the cooling kit properly pass 

through the holes of the cooling kit bracket.   

Step 4: 

Tighten the screws

. Use a screwdriver to tighten the four screws. In a diagonal 

pattern, tighten each screw a few turns then move to the next one, until they are 

all secured. Do not overtighten the screws. 

Step 5: 

Connect the fan cable

. Connect the cooling kit fan cable to the CPU fan 

connector on the SPCIE-C236. Carefully route the cable and avoid heat 

generating chips and fan blades.

Step 0:

 

Summary of Contents for SPCIE-C236
































































































































































Reviews:

No comments