IEI Technology SPCIE-C236, User Manual

Page: 109 / 159

SPCIE-C236 Full-size PICMG 1.3 CPU Card
Page 94
Î
Parity [None]
Use the Parity option to specify the parity bit that can be sent with the data bits for
detecting the transmission errors.
Î
None D
EFAULT
No parity bit is sent with the data bits.
Î
Even
The parity bit is 0 if the number of ones in the data
bits is even.
Î
Odd
The parity bit is 0 if the number of ones in the data
bits is odd.
Î
Mark
The parity bit is always 1. This option does not
provide error detection.
Î
Space
The parity bit is always 0. This option does not
provide error detection.
Î
Stop Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.
Î
1 D
EFAULT
Sets the number of stop bits at 1.
Î
2
Sets the number of stop bits at 2.