IEI Technology SPCIE-C236 User Manual Download Page 112

Page: 112 / 159

SPCIE-C236 Full-size PICMG 1.3 CPU Card

Page 97

Active Processor Cores [All]

Use the

Active Processor Cores

BIOS option to enable numbers of cores in the

processor package.

All

EFAULT

Enable all cores in the processor package.

Enable one core in the processor package.

Intel Virtualization Technology [Disabled]

Use the

Intel Virtualization Technology

option to enable or disable virtualization on the

system. When combined with third party software, Intel® Virtualization technology allows

several OSs to run on the same system at the same time.

Disabled D

EFAULT

Disables Intel Virtualization Technology.

Enabled

Enables Intel Virtualization Technology.

Intel(R) SpeedStep(tm) [Enabled]

Use the

Intel(R) SpeedStep(tm)

option to enable or disable the Intel® SpeedStep

Technology which allows more than two frequency ranges to be supported.

Disabled

Disables Intel® SpeedStep Technology

Enabled D

EFAULT

Enables Intel® SpeedStep Technology

CPU C states [Disabled]

Use the

CPU C states

option to enable or disable the CPU C states.

Disabled D

EFAULT

Disables the CPU C states.

Enabled

Enables the CPU C states.

Summary of Contents for SPCIE-C236
































































































































































Search results

Summary of Contents for SPCIE-C236

Reviews:

Related manuals for SPCIE-C236

Brands by name

Popular brands

IEI Technology SPCIE-C236, User Manual

Search results

Summary of Contents for SPCIE-C236

Reviews:

Related manuals for SPCIE-C236

Brands by name

Popular brands