IEI Technology SPCIE-3600AM2 User Manual Download Page 163

Page: 163 / 215

SPCIE-3600AM2 PICMG 1.3 CPU Card

Page 143

Figure 7-2: RAID Setup Utility

Step 12:

Locate the RAID Mode setting.

Step 13:

Select the RAID configuration type:

Mirroring

Striping

Striping and mirroring

Spanning

RAID 5

Step 14:

Locate the “Free Disks” sector of the screen.

Step 15:

From the list of free disks, select the disks that are being used in the RAID array.

Step 16:

To select a disk, move the cursor onto the disk name and then hit the right arrow

button (

→

). The disk name is then shifted to the “Array Disks” sector of the

screen.

Step 17:

Once all the disks are selected, press “

” to finish.

Step 0:

Summary of Contents for SPCIE-3600AM2
























































































































































































































Search results

Summary of Contents for SPCIE-3600AM2

Reviews:

Related manuals for SPCIE-3600AM2

Brands by name

Popular brands

IEI Technology SPCIE-3600AM2, User Manual

Search results

Summary of Contents for SPCIE-3600AM2

Reviews:

Related manuals for SPCIE-3600AM2

Brands by name

Popular brands