IEI Technology SAILORPC-12A, User Manual

Page: 49 / 110

SAILORPC-12A Panel PC
Page 39
Î
PATA Only
Only the IDE drives are enabled. SATA drives are
disabled
ƒ
Configure SATA as [IDE]
Use the
Configure SATA as
option to configure SATA devices as normal IDE devices.
Î
IDE D
EFAULT
Configures SATA devices as normal IDE device.
Î
RAID
Used when a RAID setup is installed
Î
AHCI
Enables advanced SATA drive features
5.3.2.1 IDE Master, IDE Slave
Use the
IDE Master
and
IDE Slave
configuration menu to view both primary and
secondary IDE device details and configure the IDE devices connected to the system.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Primary IDE Master
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Device :Not Detected
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Type [Auto]
LBA/Large Mode [Auto]
Block (Multi-Sector Transfer) [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
S.M.A.R.T. [Auto]
32Bit Data Transfer
[Enabled]
Select the type
of device connected
to the system
Å
Select Screen
↑ ↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 5: IDE Master and IDE Slave Configuration
ƒ
Auto-Detected Drive Parameters
The “grayed-out” items in the left frame are IDE disk drive parameters automatically
detected from the firmware of the selected IDE disk drive. The drive parameters are listed
as follows:
ƒ Device: Lists the device type (e.g. hard disk, CD-ROM etc.)