IEI Technology ROCKY-3786EV, User Manual, Page: 88 / 147

Page 88
ROCKY-3786EV CPU Card
Page 88
5.2.1 IDE Primary Master/Slave
Use the IDE Primary Master/Slave menu to set or change the master/slave IDE
configurations.
IDE HDD Auto-Detection [Press Enter]
Use the
IDE HDD Auto-Detection
option to enable BIOS to automatically detect the IDE
settings. Select
IDE HDD Auto-Detection
and press
E
NTER
.
BIOS automatically detects
the HDD type. Do not set this option manually.
IDE Primary Master [Auto]
Use the
IDE Primary Master
option to activate or deactivate the following drive channels:
Channel 0 Master
Channel 0 Slave
Channel 1 Master
Channel 1 Slave
None
If no drives are connected to the IDE channel select this
option. Once set, this IDE channel becomes
inaccessible and any drives attached to it are
undetected.
Auto
(Default) Setting this option allows the device to be automatically
detected by the BIOS.
Manual
Selecting this option allows manual configuration of the
device on the IDE channel in BIOS.
Access Mode [Auto]
The
Access Mode
option can only be configured if the BIOS configuration option is set to
either
Manual
or
Auto
. Use the
Access Mode
option to determine the hard disk BIOS
translation modes. Most systems now use hard drives with large capacities and therefore
either the LBA translation mode or auto mode should be selected.