PUZZLE-M801
Page 21
3.6 M.2 Module Installation
The M.2 slot is keyed in the B position and provides mounting screw position for 2242-size
M.2 module. To install an M.2 module, please follow the steps below.
Step 1:
Remove the top cover from the PUZZLE-M801 (refer to
Section 3.2
).
Step 2:
Locate the M.2 slot on the motherboard.
Step 3:
Remove the on-board retention screw.
Step 4:
Line up the notch on the module with the notch on the slot. Slide the M.2 module
into the socket at an angle of about 20º.
Step 5:
Push the M.2 module down and secure it with the previously removed retention
screw.
Summary of Contents for PUZZLE-M801
