IEI Technology PUZZLE-M801, User Manual, Page: 16 / 58

PUZZLE-M801
Page 8
2.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the PUZZLE-M801 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the PUZZLE-M801. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the PUZZLE-M801 or any other electrical component is
handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : When configuring the PUZZLE-M801, place it on an
anti-static pad. This reduces the possibility of ESD damaging the
PUZZLE-M801.
2.2 Unpacking Precautions
When the PUZZLE-M801 is unpacked, please do the following:

Follow the anti-static precautions outlined in Section 2.1 .

Make sure the packing box is facing upwards so the PUZZLE-M801 does not
fall out of the box.

Make sure all the components shown in Section 2.2 are present.