IEI Technology PUZZLE-IN001, User Manual, Page: 36 / 114

PUZZLE-IN001
Page 36
Step 6: Place the expansion slot module back to the original position by hooking the
slotted hole into the positioning stud in the chassis ( Figure 3-15 A ). Push the
connector of the expansion slot module into the edge connector to install it.
During installation, ensure that
1. the connector on the slot module is properly aligned and connected to the
edge connector;
2. the two studs on the side is going through the two holes in the chassis;
3. the slot module tab is going under the chassis tab.
Figure 3-15: Expansion Slot Module Installation
Step 7: Secure the expansion slot module with the four retention screws previously
removed.