IEI Technology PUZZLE-IN001, User Manual, Page: 27 / 114

PUZZLE-IN001
Page 27
Step 4: Align the DIMM so the notch on the memory lines up with the notch on the
memory socket.
Step 5: Once aligned, press down until the DIMM is properly seated. Clip the two
handles into place.
To remove a DIMM, push both handles outward. The memory module is ejected
by a mechanism in the socket. Step 0:
3.4 CPU Installation (PUZZLE-IN001-R Only)
WARNING:
CPUs are expensive and sensitive components. When installing the CPU
please be careful not to damage it in anyway. Make sure the CPU is installed
properly and ensure the correct cooling kit is properly installed.
DO NOT touch the pins at the bottom of the CPU. When handling the CPU,
only hold it on the sides.
To install the CPU, follow the steps below.
Step 1: Disengage the load lever by pressing the lever down and slightly outward to
clear the retention tab. Fully open the lever. See Figure 3-3 .
Figure 3-3: Disengage the CPU Socket Load Lever