IEI Technology PUZZLE-IN001, User Manual, Page: 32 / 114

PUZZLE-IN001
Page 32
Figure 3-8: HDD Bracket Retention Screws
Step 3: Insert an HDD into the bracket until the HDD is properly connected to the SATA
connector. Secure the HDD with four retention screws (M3*4). See Figure 3-10 .
Figure 3-9: Secure HDD to the Bracket
Step 4: Re-connect the SATA connector module to the motherboard. Make sure the two
positioning studs on the chassis go through the two small holes on the HDD