manualshive.com logo in svg

IEI Technology PSC-586VGA, Manual, Page: 6 / 31

Share
Download
IEI Technology PSC-586VGA Manual Download Page 6

4

1.1  Specifications :

The PSC-586VGA  ISA/PCI Pentium w/ VGA Single Board Computer
provides the following specification:

•

CPU

 :  Pentium 75-166Mhz

•

Bus

 :  ISA bus and PCI 32-bit local bus

•

DMA channels

 :  7

•

Interrupt levels

 : 15

•

Chipset

 : M1511/M1512/M1513

•

Real-time clock/calendar

 :  DS-12887 chip and quartz oscillator,

128B CMOS memory, powered by lithium battery for over 10 years
of data retention.

•

RAM memory

 : 2MB to 128MB,EDO and standard DRAM supported

•

Second Cache memory

 : 256KB/512KB/1MB Pipelined Burst and

                                                  Standard Cache RAM Module

•

E-IDE hard disk drive interface

 : up to four PCI Ehnace IDE hard

drives.

•

Floppy disk drive interface

 :  two 2.88 MB, 1.44MB, 1.2MB, 720KB,

or 360KB floppy disk drives.

•

Two high speed Series ports

 : NS16C550 compatible UARTs

•

Bi-directional Parallel Port

•

VGA Controller - GD54M30 :

        Bus : PCI bus

        Resolution : 1024x768 - 16 color(512KB VRAM)

                                                256 color(1MB VRAM)

                            1280x1024 - 16 color(1MB VRAM)

        Feature Connector : 26-pin hearder on board

Summary of Contents for PSC-586VGA
































Reviews:

No comments