manualshive.com logo in svg

IEI Technology prox.pad, Installation & Programming Manual, Page: 27 / 86

Share
Download
IEI Technology prox.pad Installation & Programming Manual Download Page 27

prox.pad Installation/Programming Manual

2.3  Unit Capacity

The prox.pad unit can accommodate up to 2,000 users. Each user can have a card/tag, a PIN code, or a card/tag plus a PIN code. 

A maximum of 1,000 time-stamped transactions can be stored in the prox.pad unit. Each transaction includes these parameters: Time, 
Date, User “slot number,” and event. A complete Transaction Log can be printed to the optional Data Collection Device via the built-
in IR LED. For printing details, see section 2.8. The type of Transaction Log is “First In, First Out.”  The oldest transaction gets 
deleted when the new one is added.

2.4  Alarm Output Selection

During initial installation, the prox.pad unit’s AUX relay output is wired to trigger ONE of three events. Consequently, the installer 
must know which of these events is appropriate for each installation.

●

Alarm Shunt Relay

●

Forced Door Relay

●

Propped Door Relay

Separate instructions and wiring diagrams for each of the above applications are provided later in this chapter.

NOTE: 

The capability provided by the internal local sounder (an audible alarm) is separate from the 1A AUX relay. The sounder can 

trigger regardless of how the AUX relay is programmed.

Document # 6055676, Rev 2.2, D4b                                                                                                               Page  27 of 86

Summary of Contents for prox.pad























































































Reviews:

No comments