IEI Technology PPC-F C-Q370 Series, User Manual, Page: 57 / 146

PPC-FxxC-Q370
Page 39
3.11 Power-On Procedure
3.11.1 Installation Checklist
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
To power on the panel PC please make sure of the following:

Memory modules are installed

The rear cover is installed

All peripheral devices are connected

The system is securely mounted
3.11.2 Power-on Procedure
To power-on the PPC-FxxC-Q370 please follow the steps below:
Step 1: Connect the power source to the power inlet on the bottom panel.
Step 2: Short-press the power button on the top panel to power up the system. The
power LED lights on in blue ( Figure 3-27 ). Step 0:
Figure 3-27: Power Button