IEI Technology PPC-37xxA-N26 User Manual Download

Page: 60 / 203

PPC-37xxA-N26 Panel PC

Page 44

Figure 3-34: Installing into a Rack/Cabinet

Step 5:

Once the panel PC with the attached rack/cabinet bracket has been properly

inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to

the front of the rack or cabinet (

Figure 3-34

3.10.3.2 PPC-3710A-N26 and PPC-3712A -N26

Step 1:

The back of the aluminum frame surrounding the LCD screen has retention

screw holes (PPC-3710A-N26 has 10 holes and PPC-3712A -N26 has 8 holes)

for a cabinet/rack installation bracket.

NOTE:

When purchasing the cabinet/rack installation bracket, make sure it is

compatible with both the panel PC and the rack/cabinet into which the

panel PC is installed.

Summary of Contents for PPC-37xxA-N26












































































































































































































Search results

Summary of Contents for PPC-37xxA-N26

Reviews:

Related manuals for PPC-37xxA-N26

Brands by name

Popular brands

IEI Technology PPC-37xxA-N26, User Manual

Search results

Summary of Contents for PPC-37xxA-N26

Reviews:

Related manuals for PPC-37xxA-N26

Brands by name

Popular brands