IEI Technology PPC-37xxA-N26 User Manual Download Page 187

Page: 187 / 203

PPC-37xxA-N26 Panel PC

Page 171

Step 2:

Continue to configure the

Boot Option Priorities

BIOS option of the client

system:

Boot Option #1

remain the default setting to boot from the original OS.

Boot Option #2

select the boot from LAN option.

Step 3:

Save changes and exit BIOS menu.

Exit

Save Changes and Exit

Step 4:

Install the auto recovery utility into the system by double clicking the

Utility/AUTORECOVERY-SETUP.exe

in the One Key Recovery CD. This utility

MUST be installed in the system, otherwise, the system will automatically

restore from the factory default image every ten (10) minutes.

Step 5:

Restart the client system from LAN. If the system encounters a Blue Screen of

Death (BSoD) or a hang for around 10 minutes, it will automatically restore from

the factory default image. The following screens will show when the system

starts auto recovering.

Summary of Contents for PPC-37xxA-N26












































































































































































































Search results

Summary of Contents for PPC-37xxA-N26

Reviews:

Related manuals for PPC-37xxA-N26

Brands by name

Popular brands

IEI Technology PPC-37xxA-N26, User Manual

Search results

Summary of Contents for PPC-37xxA-N26

Reviews:

Related manuals for PPC-37xxA-N26

Brands by name

Popular brands