IEI Technology PPC-3708 User Manual Download Page 74

Page: 74 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC

flat panel PC. The flat panel PC arm mount retention screw holes are shown in

Figure 3-29

Figure 3-29: Arm Mounting Retention Screw Holes

Step 4:

Secure the flat panel PC to the interface pad by inserting four retention screws

through the bottom of the mounting arm interface pad and into the flat panel PC.

Step 0:

3.9.4 Cabinet and Rack Installation

The PPC-3708, PPC-3710 and PPC-3712 flat panel PC can be installed into a cabinet or

rack. To do this, please follow the steps below.

3.9.4.1 PPC-3708 Cabinet and Rack Installation

Step 1:

Slide the rear chassis of the PPC-3708 flat panel PC through the rack/cabinet

bracket until the aluminum frame is flush against the front of the bracket (

Figure

3-30

Page 74

Summary of Contents for PPC-3708


































































































































































Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands

IEI Technology PPC-3708, User Manual

Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands