IEI Technology POC-W22A-H81 User Manual Download Page 65

Page: 65 / 154

POC-W22A-H81 Medical Panel PC

Page 51

4.1 Available Software Drivers

NOTE:

The contents of the driver folder may vary throughout the life cycle of

the product and is subject to change without prior notice. Visit the IEI

website or contact technical support for the latest updates.

All the drivers for the POC-W22A-H81 are on the utility CD that came with the system. To

install the drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

Step 2:

The driver main menu with a list of available drivers appears (

Figure 4-1

Figure 4-1: Available Drivers

Step 3:

Install all of the necessary drivers in this menu.

Summary of Contents for POC-W22A-H81



























































































































































Search results

Summary of Contents for POC-W22A-H81

Reviews:

Related manuals for POC-W22A-H81

Brands by name

Popular brands

IEI Technology POC-W22A-H81, User Manual

Search results

Summary of Contents for POC-W22A-H81

Reviews:

Related manuals for POC-W22A-H81

Brands by name

Popular brands