IEI Technology PM-US15W, User Manual

Page: 85 / 115

PM-US15W User Manual
Page 85
Î
Detected Serial Port r [1]
Use the Detected Serial Port option to select the serial port used for remote access.
Î
1 D
EFAULT
System is remotely accessed through COM1
Î
2
System is remotely accessed through COM2
Î
3
System is remotely accessed through COM3
NOTE : Make sure the selected COM port is enabled through the Super I/O configuration
menu.
Î
Base Address, IRQ [3F8h,4]
The Base Address, IRQ option cannot be configured and only shows the interrupt
address of the serial port listed above.
Î
Serial Port Mode [115200 8,n,1]
Use the Serial Port Mode option to select baud rate through which the console redirection
is made. The following configuration options are available
ƒ
115200 8,n,1 D
EFAULT
ƒ
57600 8,n,1
ƒ
38400 8,n,1
ƒ
19200 8,n,1
ƒ
09600 8,n,1
NOTE:
Identical baud rate setting musts be set on the host (a management
computer running a terminal software) and the slave
Î
Redirection After BIOS POST [Always]
Use the Redirection After BIOS POST option to specify when console redirection should
occur.