IEI Technology PM-US15W User Manual Download Page 74

Page: 74 / 115

PM-US15W User Manual

Page 74

Enhanced D

EFAULT

Configures the on-board ATA/IDE controller to be in

Enhanced mode. In this mode, IDE channels and SATA

channels are separated. This mode supports up to 6

storage devices. Some legacy OS do not support this

mode.

Configure SATA as [IDE]

Use the

Configure SATA as

option to configure SATA devices as normal IDE devices.

IDE D

EFAULT

Configures SATA devices as normal IDE device.

Configure SATA Channels [Behind PATA]

Use the

Configure SATA Channels

option to determine how SATA channels and PATA

channels are ordered.

Before PATA

Puts SATA channels before PATA channels.

Behind PATA

EFAULT

Puts SATA channels behind PATA channels.

Legacy IDE Channels [PATA Pri, SATA Sec]

SATA Only

Only the SATA drives are enabled.

PATA Pri, SATA Sec

EFAULT

The IDE drives are enabled on the Primary

IDE channel. The SATA drives are enabled on

the Secondary IDE channel.

PATA Pri., PATA Sec

The IDE drives are enabled on the primary

and secondary IDE channels. SATA drives

are disabled.

OnBoard PCI IDE Controller [Both]

Use the

OnBoard PCI IDE Controller

BIOS option to specify the IDE channels used by

the onboard PCI IDE controller. The following configuration options are available.

Summary of Contents for PM-US15W




















































































































Search results

Summary of Contents for PM-US15W

Reviews:

Brands by name

Popular brands

IEI Technology PM-US15W, User Manual

Search results

Summary of Contents for PM-US15W

Reviews:

Brands by name

Popular brands