IEI Technology PM-PV-N4551/D5251, User Manual

Page: 50 / 115

PM-PV-N4551/D5251 User Manual
Page 38
o
When working with the PM-PV-N4551/D5251, make sure that it is
disconnected from all power supplies and that no electricity is being fed
into the system.
Before and during the installation of the PM-PV-N4551/D5251 DO NOT:

Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.

Use the product before verifying all the cables and power connectors are
properly connected.

Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
4.2.2 Installation Checklist
The following checklist is provided to ensure the PM-PV-N4551/D5251 is properly
installed.

All the items in the packing list are present

A compatible memory module is properly inserted into the slot

The CF Type I or CF Type II card is properly installed into the CF socket

The jumpers have been properly configured

The PM-PV-N4551/D5251 is inserted into a chassis with adequate ventilation

The correct power supply is being used

The following devices are properly connected
o
SATA drive
o
RS-232 devices
o
RS-422/485 devices
o
Keyboard and mouse
o
LAN
o
LCD backlight
o
Power
o
LVDS LCD screen
o
VGA display
o
USB port